Clastic

The Clastic Collection brings the tactile serenity of natural stone into modern spaces. Reinterpreting the essence of clastic rock formations, this collection showcases the delicate, cemented fragments of the earth in a beautifully understated porcelain tile.

Crafted with an innovative Honed+ finish, Clastic delivers an ultra-matte, non-reflective surface that feels distinctly velvety and rich to the touch. This American-made collection is available in a versatile palette of five neutral shades designed to ground your design.

Beyond its sophisticated aesthetic, Clastic boasts high chemical and stain resistance alongside advanced slip-resistance, making it a perfect, low-maintenance choice for seamless indoor-outdoor layouts.

Grounded Luxury. Organic Texture.
The art of fragmented beauty.

product info

Material: Colorbody Porcelain | Rectified

Finish: Honed+

8 mm ⦊|⦉

24×48
12×24
2×2 Mosaic (12×12 sheet)
2×12 Mosaic (12×12 sheet)
3×24 Bullnose
6×12 Cove Base

*Not available in Gray.
**Only available in White & Light Brown.

Made in the US. Special Order.

technical info

Frost Resistant: Yes

Breaking Strength: ≥ 400 lbf

DCOF: ≥ 0.42 Wet

Water Absorption: < 0.1 %

Scratch Hardness: ≥ 7

Shade Variation: V2 – Moderate, Slight variation between tiles.

Applications

Residential & Commercial
Interior & Exterior
Walls & Floors — Perfect for Kitchens, Bathrooms, Living Areas, and Commercial spaces

Special Notes

Recommended grout joint: 3/32” or greater.
Grout joints of 1/8″ inch or less, especially with larger format tiles or running bond patterns, may require floor flatness values in excess of the 1/4″ in 10’ (or 1/16” in 1.0’) standard required by ANSI.
Surface preparations: All installation work using Stonepeak Ceramics’ tiles will conform to the standards set forth in the latest version of ANSI A108/118 and/or the TCNA Handbook for Ceramic Tile installations. All substrates should be between 40 degrees F and 90 degrees F and structurally sound, clean and free of all dirt, oil, grease, paint, concrete sealers or curing compounds as per ANSI A108.01.
Deflection: Substrate must conform to all state and local building code requirements and ANSI A108.01 for maximum allowable substrate deflection
Movement joints: Movement joints shall be provided throughout the tile and work will conform to ANSI Specification A108.01-3.7; A108.02 – 4.4.and TCNA Details EJ171.
Installation or setting materials: Setting materials used will conform to the ANSI 118.4 standard or greater and be recommended by the selected manufacturer for the installation & setting materials for ceramic or porcelain tile based on the application requirements.
Pre-consumer Recycled Content: This porcelain product, contains at least 40% pre-consumer recycled content, with all claims certified by Bureau Veritas Certification.