Franco

Step into the timeless charm of the French countryside with Franco. Inspired by the textures and aesthetics of traditional French dwellings, each material exudes a handcrafted allure, reminiscent of artisanal craftsmanship passed down through generations.

The collection’s range of neutral nuances evokes a sense of antique enchantment, transforming any space into a haven of elegance and history.

The timeless charm of French countryside, exuding the hand-crafted allure of artisanal craftsmanship passed down through generations.

product info

Material: Colorbody Porcelain | Rectified

Finish: Natural/Matte

8 mm ⦊|⦉

24×24
12×24
2×2 Mosaic (12×12 sheet)*
3×6 Mosaic (12×12 sheet)
4×24 Bullnose**
3×24 Bullnose
6×12 Cove Base

*Not available in Gray.
**Only available in White & Light Brown.

Special order from USA.

technical info

Frost Resistant: Yes

Breaking Strength: ≥ 275 lbf

DCOF: ≥ 0.52 Wet

Water Absorption: < 0.1 %

Scratch Hardness: ≥ 7

Shade Variation: V2 – Moderate, Slight variation between tiles.

Applications

Residential & Commercial
Interior & Exterior
Walls & Floors — Perfect for Kitchens, Bathrooms, Living Areas, and Commercial spaces

Special Notes

Recommended grout joint: 3/32” or greater.
Grout joints of 1/8″ inch or less, especially with larger format tiles or running bond patterns, may require floor flatness values in excess of the 1/4″ in 10’ (or 1/16” in 1.0’) standard required by ANSI.
For patterns with running bond/brick joints, Stonepeak recommends a maximum of 33% offset.
Surface preparations: All installation work using Stonepeak Ceramics’ tiles will conform to the standards set forth in the latest version of ANSI A108/118 and/or the TCNA Handbook for Ceramic Tile installations. All substrates should be between 40 degrees F and 90 degrees F and structurally sound, clean and free of all dirt, oil, grease, paint, concrete sealers or curing compounds as per ANSI A108.01.
Deflection: Substrate must conform to all state and local building code requirements and ANSI A108.01 for maximum allowable substrate deflection
Movement joints: Movement joints shall be provided throughout the tile and work will conform to ANSI Specification A108.01-3.7; A108.02 – 4.4.and TCNA Details EJ171.
Installation or setting materials: Setting materials used will conform to the ANSI 118.4 standard or greater and be recommended by the selected manufacturer for the installation & setting materials for ceramic or porcelain tile based on the application requirements.
Pre-consumer Recycled Content: This porcelain product, contains at least 40% pre-consumer recycled content, with all claims certified by Bureau Veritas Certification. Recycled content is a LEED metric intended to increase demand for building materials that incorporate reused or repurposed materials.